|
If
the answer to your question does not appear below,
please email us at support@brwcontrol.com
.
We will reply to your message as soon as
possible.
IIDAS
(Integrated Impact Detection Alarm
System)
Q: What kind of protection
does IIDAS offer?
A: IIDAS is an
anti-tamper, anti-abuse security system, and also
offers protection against unauthorized
intrusion.
Q: How does IIDAS
work?
A: Whenever a protected
machine is excessively rocked, shaken, kicked, or
otherwise abused, the IIDAS impact/abuse
sensor will activate an alarm output for 30
seconds. Normally, the alarm output activates an
audible siren, but IIDAS will also activate
phone dialers, still frame and video cameras, and
other devices.
Q: Does the alarm output
shut off automatically?
A: Yes. After 30 seconds
the alarm output will stop (reset). However,
whenever the protected machine is excessively
rocked or shaken again the alarm cycle will
continue for another 30 seconds.
Q: Can the impact/abuse
level be adjusted?
A: Yes. There is a window
on top of each IIDAS controller through
which an adjustment screw can be reached. Using a
small flathead screwdriver you can adjust the
sensitivity level to whatever impact threshold is
deemed appropriate.
Q: Suppose I need a
shorter or longer alarm timeout than 30
seconds?
A: BRW can shorten or
lengthen the IIDAS alarm timeout from 3
seconds to 2 1/2 minutes at its factory. Just let
us know when your order is placed.
Q: How does IIDAS
protect against unauthorized intrusion?
A: Using either an on-off
key switch lock (KA system only), or a small reset
switch (1050 system only), IIDAS also
provides door protection.
The on-off key switch lock
(which is drilled into the protected equipment) is
simply turned off before the protected service door
is opened, and then turned back on when the machine
has been serviced.
If drilling a hole for the
key switch lock assembly presents a problem, a
reset switch can be used inside the machine (1050
Maximum system) to arm and disarm the system. The
operator has five seconds after opening the
protected door to locate and push the concealed
reset switch, before the alarm is activated. After
servicing the machine, and closing the access door,
the IIDAS system will "chirp" to confirm
that the system has automatically
rearmed.
Q: What is included in
the IIDAS security system?
A: Every IIDAS
security system includes the security controller
(1020 or 1050), a 12VDC battery pack, battery
connectors, 128db horn siren, wire nuts, cable
ties, quick splices, door contact switches,
spacers, tie mounts, L-brackets, installation
instructions, and warning label.
Q: What powers the
IIDAS security system?
A: Normally, IIDAS
security systems are powered by a 12VDC battery
pack. This means that IIDAS can operate
independently of the protected machine's own power
supply. However, IIDAS security systems will
also operate with power sources ranging form 5VDC
(TTL) to 15VDC.
Q: How long will the 12V
battery pack last?
A: In a normal monitoring
mode, BRW's 12V battery pack should last at least
2-3 years, because there is virtually no current
drain until IIDAS is activated. However, if
an IIDAS security system is exceptionally
active, with many alarm cycles every month, the
battery's service life will naturally be
shortened.
Q: Could I use the
electrical supply of the protected machine to power
IIDAS?
A: Yes, that may be
possible. However, the ideal power supply for
IIDAS is 12VDC. IIDAS will not
operate on 110V AC or 220V DC power unless the
power supply is stepped down and converted to
12VDC.
Q: Could I use a
rechargeable battery pack to power the IIDAS
security system?
A: Yes. However, BRW does
not carry a rechargeable power system in its list
of accessories because in most IIDAS
applications rechargeable batteries are more
expensive and inconvenient to use than BRW's 12V
battery pack.
Q: How long does it take
to install an IIDAS security
system?
A: Typically, the first
installation will take approximately 25-30 minutes.
Thereafter, probably no more than 20 minutes. Every
IIDAS security system includes complete
step-by-step installation instructions, with a
wiring diagram, and suggested placement for each
component (see the wiring diagrams on the various
product pages).
Q: How loud is the
siren?
A: The standard siren that
comes with all IIDAS security systems is
rated at 128db at one meter. This is equivalent to
a car alarm siren. Of course, when placed inside
the protected equipment the siren's sound will be
somewhat muffled. BRW can substitute other sirens
to meet the needs of individual customers.
Q: What is the cost of an
IIDAS security system?
A: There are several
IIDAS security systems for various types of
coin operated and publicly accessible equipment
(e.g., vending, coin amusement and video, public
payphones, calling card machines, etc.) To see
BRW's current price
list click here .
For questions about which system is most
appropriate for particular situations, please call
or email BRW.
Q: Can IIDAS
security systems be modified?
A: Yes. Certain operators
and OEMs have particular requirements that might
not be satisfied with a standard IIDAS
security system. BRW can modify the features of
its' IIDAS controllers, or substitute a
variety of components from its accessory list, to
meet those individual needs.
Q: Can BRW's Tip Alarms be
integrated with an IIDAS security
system?
A: Yes. If tip protection
is needed, in addition to the impact/abuse and door
protection offered by IIDAS, BRW can supply
a suitable tip controller to accomplish that result
(see description of Tip Alarms, below).
Tip
Alarm Systems
Q: How do BRW's Tip Alarms
work?
A: Whenever the protected
equipment is tilted, in any direction, beyond the
degree indicated on the controller (10, 15, 25 or
45 degrees), the Tip Alarm System will sound an
audible siren until the equipment is returned to a
level position. However, unlike IIDAS
security systems, BRW's Tip Alarms do not have an
automatic timeout that shuts the siren off after a
certain period of time.
Q: How can I determine
which Tip controller is most suitable for my
situation?
A: Large and heavy
equipment, such as full size vending machines,
should probably use either a Tip 10 or Tip 15
controller. Less weighty equipment, such as crane
machines or large gumball machines, should probably
use a Tip 25 controller. The Tip 45 controller is
generally suitable only for small or light weight
machines, such as bulk vending equipment, which can
easily be picked up or knocked over.
Q: Should I use a Tip Maxi
or Tip Mini system?
A: Aside from price
( see
price list ), the
main difference between the Maxi and Mini systems
is the amount of noise that each generates. The
Maxi system normally includes a 128db horn siren;
the Mini system includes a 108db piezo siren. Piezo
sirens are electronic and have a high pitch. For
indoor locations where loud sirens would not be
acceptable, the Mini system would probably be
adequate for most customers. For outdoor locations,
or situations where a loud siren is necessary, the
Maxi system would be preferable. Remember, when
placed inside the protected equipment any siren
will be muffled. BRW can substitute various sirens
from its' accessory
list when
necessary.
Q: What is included in the
Tip Alarm Maxi and Tip Alarm Mini
Systems?
A: Both systems include a
Tip controller (10, 15, 25 or 45 degrees). The Mini
system also includes a 9V battery holder, battery
wire connectors, wire nuts, a 108db piezo siren,
instructions and a warning label. The Maxi system
includes the Tip controller, a 12VDC battery pack,
battery connectors, wire nuts, a 128db horn siren,
instructions and a warning label.
Q: How difficult is it to
install a Tip Alarm System?
A: It's simple. The
instructions are easy to follow and include a
wiring
diagram and
suggested placement for the components.
Installation should not take more than 5
minutes.
Q: Will Tip Alarms work
with all types of coin operated
equipment?
A: Generally speaking,
yes. But they will work best with full-size vending
or coin amusement games that weigh several hundred
pounds.
Q: What about coin
equipment that weighs less, such as small bulk
vending machines or sticker machines? Will BRW's
Tip Alarms work as well in that type of
equipment?
A: That depends. Protected
equipment weighing less than 100lbs. or standing
upon a pedestal often has a tendency to shake or
rock in normal operation, which can produce
audible siren flutter. BRW has designed an
accessory component, the "Flutter Filter",
which will suppress siren flutter caused by
normal shaking or rocking, but will
not override the Tip Alarm system when the
protected equipment is tilted beyond the degree
(10, 15, 25, or 45 degrees) indicated on the tip
module. For more information click
here .
|
